ELECTRICAL TESTERS
Remote & Local Continuity Tester
One person operation for wire and cable testing:
- Local continuity checking is accomplished by a bright flashing LED and loud pulsating beeper.
- Remote continuity with the use of the remote probe, it does not tie-up two people when identifying and labeling long distance wire/cable runs.
- Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a a time for correct labeling with only one trip to the other end location - cuts down on multiple trips back and forth.
- Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
- Great from Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers, Auto Repair Technicians, Carpenters, Handymen, and Do-it-yourself Homeowners.
- PART#CT20


Wire Tracer/Tone Generator Kit
Trace communications and coaxial cables
- Non-Contact probe audibly identifies selected wire or cable
- Easily trace wires from source to termination
- Adjustable sensitivity control improves wire
identification and eliminates false detection
- Continuity test with audible and visible indication
- Part #TG30
Multifunction Voltage Tester
Voltage and Continuity with Flashlight
- LED AC/DC voltage indication:
AC: 24, 48, 120, 208, 240, 277, 480, 600
DC: 6, 12, 24, 36, 48, 110, 220, 400
- Polarity detection with LEDs for positive and negative DC
- Continuity Test with audible tone
- Two handed operation for low impedance testing
- Built-in flashlight for testing in tight areas
- Voltage function operates without battery
- Rubberized double-molded IP64 housing
- PART#VT10
LAN Cable Tester
Verify wiring integrity of twisted pair LANs
- Tests for shorts, opens, miswires, reversals and split pairs
- Debug mode for diagnosis of faults
- Tests EIA/TIA568A and 568B, 10Base-T and Token Ring
- Shield detection tests shield
- Part #CT200
AC Circuit Breaker Finder/Receptacle Tester
Locates circuit breakers and tests receptacle wiring
- Quickly locate 110V to 125VAC Circuit Breakers and Fuses
- Variable Sensitivity adjustment to pinpoint correct circuit breaker
- Bright Red and Green LEDs indicates if receptacle is correctly wired or six fault conditions
- Push button GFCI test
- Audible and visual circuit breaker indication
- Convenient storage position for transmitter/receptacle tester
- Eliminates circuit interruptions
- UL listed
- Complete with 9V battery for the Receiver
- PART#CB10
LCD Multifunction Voltage Tester
Continuity and Voltage with Flashlight :
- Large backlit LCD display
- LCD AC/DC voltage indication: 6V, 12V, 24V, 50V, 230V, 400V, 690V
- Polarity detection with LEDs for positive and negative DC
- Continuity Test with audible tone
- Two handed operation for low impedance testing
- Built-in flashlight for testing in tight areas
- Voltage function operates without battery
- Rubberized double-molded IP64 housing
- PART#VT30
Heavy Duty Continuity Tester
- Ideal for checking continuity of non-energized comonents, fuses, switches, relays, wiring and circuit boards
- Features 30" (76cm) Test lead with alligator clip
- PART# ET40
Vibrating Solenoid Voltage Tester
- Indicate 50/60Hz AC or DC Voltage (120 to 600V) and polarity
- When AC voltage is detected, tester will display the voltage level and vibrate slightly.
- When DC voltage is detected, the voltage and polarity wil lbe diplsayed but will not vibrate
- Features retractable test prods that can be locked in the retracted position for continuous use
- PART#ET50
AC/DC Voltage Tester
- Two glowing red LEDs indicate AC Voltage from 4.5V to 480V while a single glowing LED
indicates DC Voltage and polarity from 4.5V to 480V.
- Neon indicators glow when voltage reaches 120V, 240V, and 480V
- PART#ET35
Automotive Circuit Tester
- Ideal for checking circuits, fuses, switches and wiring on automobiles, trailers, boats, motorcycles and other low voltage systems
- Tests DC Voltage from 6 to 24V
- PART#ET30
Voltage Tester
- Checks voltage from 90 to 300V AC/DC. Neon indicator glows if circuit is live.
- Includes Pocket clip and insulated housing
- PART#ET25
-
Voltage Tester
- Checks voltage from 90 to 300V AC/DC. Neon indicator glows if circuit is live.
- Includes Pocket clip and insulated housing
- PART#ET25
Voltage Tester
- Checks voltage from 90 to 300V AC/DC. Neon indicator glows if circuit is live.
- Includes Pocket clip and insulated housing
- PART#ET25
AC Voltage Detector/Flashlight
Non-contact detection of AC Voltage with built -in flashlight
- Non-Contact Detection of AC Voltage from 100VAC to 600VAC
- Rugged, double molded case
- Suitable for outlets or against wire insulation testing
- Red LED light indicator
- Built-in bright flashlight with ON/OFF button
- PART#DV20
AC Voltage Detector/Flashlight
Non-contact detection of AC Voltage with built -in flashlight
- Non-Contact Detection of AC Voltage from 100VAC to 600VAC
- Rugged, double molded case
- Suitable for outlets or against wire insulation testing
- Red LED light indicator
- Built-in bright flashlight with ON/OFF button
- PART#DV20